Page 1 of 1

Want magnets?

Posted: Thu 2013-05-30, 20:40:41
by GoodDog
I plan to place an order for some magnets.

• Dimensions: 12.6mm dia. x 5mm thick
• Tolerances: ±0.1mm x ±0.1mm
• Material: NdFeB, Grade N35
• Plating/Coating: Ni-Cu-Ni (Nickel)
• Magnetization Direction: Axial (Poles on Flat Ends)
• Weight: 0.164 oz. (4.64 g)
• Pull Force, Case 1: 7.74 lbs
• Pull Force, Case 2: 13.25 lbs
• Surface Field: 3761 Gauss
• Brmax: 12,100 Gauss
• BHmax: 35 MGOe
Approximately 1/2" dia. x 3/16" thick. Strong mid-sized magnets at a surplus price. Notice in the lower picture on the left that the South pole is marked with a red stripe on each magnet.
Image


I don't know what the shipping rate will be (suppose to be standard ups or usps prices), but I'm guessing the price per magnet will be about come out to about $1.25 each. If you want some let me know. I won't be making any money on this, this is just a chance to get some magnets. I would like to place the order next week (June 7).

Re: Want magnets?

Posted: Thu 2013-05-30, 20:52:07
by cheechgang
Actually I was looking for a BHmax of 36 MGOe. Does the penny come with it?

Re: Want magnets?

Posted: Fri 2013-05-31, 20:21:27
by GoodDog
cheechgang wrote:Actually I was looking for a BHmax of 36 MGOe. Does the penny come with it?

The 36 MGOe Bi-max has been discontinued due to polarity problems.

The penny is optional, but can be added for .25 cents extra.

Re: Want magnets?

Posted: Thu 2013-06-13, 13:32:17
by GoodDog
The magnets are on the way. For the person who ordered the penny also, there is the 25cent upcharge, but that also kicked up the order to a higher shipping rate, so that's another $2.35. Sorry.